Inspired by the works of Josef Hoffmann (15 December 1870 - 7 May 1956)
He was an Austrian architect, designer, and co-founder of the Wiener Werkstätte.
I am drawn to Hoffmann’s use of square and rectangular patterns in his designs and architecture. The ring’s appearance shifts as you rotate various patterned sections to the front of your finger.
This ring is 3D-printed in wax, then cast in sterling silver using the classic lost-wax method. The ring is hand-finished.
ring Hoffmann A
2017
limited edition of 25
sterling silver
hallmarks 925 / maker's mark
height 8.2 mm / 0.32 Inch
width 22 mm / 0.86 Inch
depth 22 mm / 0.86 Inch
ring size Ø 18 mm
US 7¾
U 56 mm
No 16
This design is custom made.